Oki OKIPOS X400 Programming Manual page 105

data =
GPaaaaa,(data) PCX Graphics. Prints a graphic with standard PCX format.
aaaaa =
GRaaa Expansion Memory Function. Recalls custom designed character
from expansion memory.
aaa =
Haaaa Horizontal Position. Specifies a field's horizontal location across the Page 56
width of the label from the current base reference point. The units of
measurement are dots.
aaaa =
J Journal Print. Provides the ability to print text line by line. Fixed
spacing between lines and characters.
Kab90cc Recall Custom Designed Characters. Recalls for printing a custom
character stored by the Tabcc(data) command.
a
b
cc
(data) =
Laabb Character Expansion. Expands character in both directions.
aa
bb
LDa,b,c,d,e,f,g,h,i Protocol Code Select. Selects the hexadecimal protocol codes to be
used.
All manuals and user guides at all-guides.com
Hex or binary data to describe the graphic image
Number of bytes to be downloaded.
Graphics storage number (1 ~ 999).
Number of dots horizontally from the base reference point
1 to 832.
= 1 16x16 matrix
2 24x24 matrix
= Specifies the character encoding method for the data stream
H hexadecimal characters
B Binary characters
If B is specified than both 90 and cc codes are represented by one
byte code separately.
= Code to store/recall the character. Valid code ranges are 21H to
52H in Hex or "!" to "R" in Binary.
Data to describe the character image either in Hex or Binary
format.
= Multiple to expand horizontally (01~12).
= Multiple to expand vertically (01~12).
103
Page 47
Page 75
Page 48
Page 22
Page 24
Page 89