Oki OKIPOS X400 Programming Manual page 97

Command Structure <ESC>CPa
a
Example: <ESC>CP0
Placement: Must precede all other commands in the data stream.
Default:
Command Function To optimize the print head heat management algorithms.
Input to Printer
<ESC>A
<ESC>CP0
<ESC>Z
Printer Output
There is no printer output as a result of this command.
Special Notes The print mode setting is stored in nonvolatile memory and will not change until a
new Set Print Mode command is received. The current print mode can be verified by
printing a test label.
All manuals and user guides at all-guides.com
Set Print Mode
= 0 for Direct Thermal Printing (without ribbon)
1 for Thermal Transfer Printing (with ribbon)
1 for OKIPOS X400 model.
95