Oki OKIPOS X400 Programming Manual page 65

Command Structure <ESC>(aaaa,bbbb
aaaa =
bbbb =
Example: <ESC>(100,50
Placement: This command must be preceded by all other data and be
Default:
Command Function To reverse an image area from black to white and vice versa. Use the Print
Position commands (<ESC>H and <ESC>V) to locate the top left corner of the
Reverse image data.
Input to Printer
<ESC>A
<ESC>H50<ESC>V120<ESC>L0202<ESC>WB1REVERSE
<ESC>H250<ESC>V300<ESC>L0202<ESC>WB1HALF
<ESC>H40<ESC>V110<ESC>(370,100
<ESC>H240<ESC>V290<ESC>(220,47
<ESC>Q1<ESC>Z
Printer Output
Special Notes 1. A reverse image area is affected by the rotate commands. Therefore, always
assume the printer is in the normal print orientation when designing and
sending the Reverse Image command.
2. If using reverse images with the form overlay, place this command before the
Form Overlay command in the data stream.
All manuals and user guides at all-guides.com
Reverse Image
Horizontal length in dots of reverse image area
1 to 832.
Vertical height in dots of reverse image area
1 to 10150
placed just before <ESC>Q.
None
63