Oki OKIPOS X400 Programming Manual page 107

S Font Type. Specifies the 8Wx15H dot matrix font (including
descenders).
Tabcc(data) Store Custom Designed Characters. To create and store custom
characters or images in the printer's volatile memory. See Kab90cc
to recall the character for printing.
a
b
cc
(data) =
U Font Type. Specifies the 5Wx9H dot matrix font (including
descenders).
Vbbbb Vertical Position. Specifies a field's vertical location down the
length of the label from the current base reference point. The units of
measurement are dots.
bbbb =
WBa Font Type. Specifies the 18Wx30H dot matrix font (including
descenders).
WDHaaaaVbbbbXccccYdddd
Copy Image Area. To copy an image to another location of the label.
aaaa =
bbbb =
cccc =
All manuals and user guides at all-guides.com
= 1 16x16 matrix
2 24x24 matrix
= Specifies the character encoding method for the data stream
H hexadecimal characters
B Binary characters
If B is specified than both 90 and cc codes are represented by one
byte code separately.
= Code to store/recall the character. Valid code ranges are 21H to
52H in Hex or "!" to "R" in Binary.
Data to describe the character image either in Hex or Binary
format.
Number of dots vertically from the base reference point
1 to 8120.
Horizontal position of the top left corner of the area to be copied
0001 to 832.
Vertical position of the top left corner of the area to be copied
0001 to 1424.
Horizontal length of the image area to be copied
105
Page 36
Page 22
Page 36
Page 56
Page 38
Page 32