Oki OKIPOS X400 Programming Manual page 61

Command Structure <ESC>CSa
a
Example: <ESC>CS3
Placement: Must be placed immediately after <ESC>A and immediately before
Default:
Command Function To specify a unique print speed through software for a particular label. This
allows flexibility in finding the best performance and quality for the particular
label format, media, and ribbon. All subsequent labels will print at this speed
unless the speed is changed with this command.
Input to Printer
<ESC>A
<ESC>CS3
<ESC>Z
Printer Output
There is no printer output for this command. It sets the print speed of the
printer to 3 inches per seconds.
Special Notes This becomes the new setting in the printer configuration for all subsequent print
jobs, unless changed. The settings is stored in non-volatile memory and is not
affected by cycling the power.
All manuals and user guides at all-guides.com
Print Speed
= Designates the speed selection.
1 = 1 ips (25 mm/s)
2 = 2 ips (50 mm/s)
3 = 3 ips (75 mm/s)
4 = 4 ips (100 mm/s)
<ESC>Z in its own data stream.
As previously set in the printer configuration.
59