Oki OKIPOS X400 Programming Manual page 64

Special Notes 1. Specify the exact same parameters for the image to be replaced as were speci-
fied in the original data stream, including rotation, expansion, pitch, etc.. This
will ensure that the new data will exactly replace the old image. If the replace-
ment data contains fewer characters than the old data, then the characters not replaced
will still be printed.
2. This command will not function if the power has been cycled off and back on
since the last label was printed.
3. Proportional Pitch text cannot be used with this command.
All manuals and user guides at all-guides.com
62