Hyundai Santa Cruz Owner's Manual page 458

Driver Assistance System
• Navigation-based Smart Cruise
Control operating
ONX4OB071099 ONX4OB071099
If temporary deceleration is required in
the standby state and Navigation-based
Smart Cruise Control is operating, the
green symbol illuminates on the
cluster.
If the Highway Auto Speed Change
function operates, the
set speed illuminates in green on the
cluster, and an audible warning sounds.
WARNING
Type A Type A
ONX4OB071102 ONX4OB071102
'Drive carefully' warning message
appears in the following circumstances:
- Navigation-based Smart Cruise
Control is not able to slow down your
vehicle to a safe speed
7-106
ONX4OB071101 ONX4OB071101
symbol and
Type B Type B
ONX4OB071103 ONX4OB071103
Information
Highway Auto Curve Slowdown and
Highway Auto Speed Change function
uses the same symbol.
Highway Auto Curve Slowdown
• Depending on the curve ahead on the
highway, the vehicle will decelerate,
and after passing the curve, the
vehicle will accelerate to Smart Cruise
Control set speed.
• Vehicle deceleration time may differ
depending on the vehicle speed
and the degree of the curve on the
road. The higher the driving speed,
deceleration will start faster.
Highway Auto Speed Change
• Highway Auto Speed Change function
will operate when Smart Cruise
Control set speed and the highway
speed limit is matched.
• While Highway Auto Speed Change
function is operating, when the
highway speed limit changes,
Smart Cruise Control set speed
automatically changes to the changed
speed limit.
• If Smart Cruise Control set speed is
adjusted different from the speed
limit, Highway Auto Speed Change
function will be in the standby state.
• If Highway Auto Speed Change
function has changed to the standby
state by driving on a road other than
the highway main road, Highway Auto
Speed Change function will operate
again when you drive on the main
road again without setting the set
speed.