Hyundai Santa Cruz Owner's Manual page 372

Driver Assistance System
Stopping vehicle and ending brake control
• When the vehicle is stopped due
to emergency braking, the 'Drive
carefully' warning message appears
on the cluster.
For your safety, the driver should
depress the brake pedal immediately
and check the surroundings.
• Brake control ends after the vehicle
is stopped by emergency braking for
approximately 2 seconds.
7-20
Junction Turning function
Warning and control
Junction Turning function will warn and
help control the vehicle depending on
the collision risk level: 'Collision Warning',
'Emergency Braking' and 'Stopping
vehicle and ending brake control'
ONX4OB071005 ONX4OB071005
Collision Warning
• To warn the driver of a collision, the
'Collision Warning' warning message
appears on the cluster and an audible
warning sounds.
• The function operates when
your vehicle speed is between
approximately 6-19 mph (10-30 km/h)
and the oncoming vehicle speed is
between approximately 19-44 mph
(30-70 km/h).
• If 'Active Assist' is selected, braking
may be assisted.
ONX4OB072010 ONX4OB072010