Hyundai Santa Cruz Owner's Manual page 447

Smart Cruise Control conditions not
satisfied
If the Driving Assist button, + switch,
- switch or switch is pushed when
Smart Cruise Control's operating
conditions are not satisfied, the 'Smart
Cruise Control conditions not met'
appears on the cluster, and an audible
warning sounds.
ONX4OB071061 ONX4OB071061
In traffic situation
In traffic, your vehicle will stop if the
vehicle ahead of you stops. Also, if the
vehicle ahead of you starts moving, your
vehicle will start as well. In addition, after
the vehicle has stopped and a certain
time have passed, the 'Use switch or
pedal to accelerate' message appears
on the cluster. Depress the accelerator
pedal or push the + switch, - switch or
While the message is displayed on the
cluster, if there is no vehicle in front or
the vehicle is far away from you, and
the + switch, – switch or
is operated, Smart Cruise Control will
automatically cancel and EPB will be
applied. However, if the accelerator
pedal is depressed, EPB will not be
applied even though the function is
canceled. Always pay attention to the
road condition ahead.
switch to start driving.
WARNING
07
ONX4OB071062 ONX4OB071062
switch
7-95