Sidewall Molded In Features - Hyundai Santa Cruz Owner's Manual

Sidewall Molded in Features

Commonly sold lumber items to be
added to the pickup bed, allowing users
to customize.
2x6 cross pickup bed support shelf
Cut two 2"x6" pieces of standard lumber
to ~52" lengths and inset into forming's
provided on the sidewalls.
A 4'x4' sheet of plywood can be placed
on top of the 2x6 supports to form a shelf
within the pickup bed.
Plywood carrying shelf
Steps to put liftgate in plywood position:
1. Detach both left and right support
cables.
2. Lift liftgate upward to 20 degrees from
ONX4OB051073 ONX4OB051073
full open position.
3. Connect both cables just below the
striker onto the lower bolt.
• It is recommended to close the
tonneau cover securely before
driving.
• Ensure tonneau cover doesn't
interfere with cargo during
operation.
• Do not stand or sit on the tonneau
cover.
ONX4OB051074 ONX4OB051074
WARNING
05
ONX4OB051075 ONX4OB051075
5-119