Engine Compartment Panel Fuse Replacement - Hyundai Santa Cruz Owner's Manual

Engine Compartment Panel Fuse
Replacement
Blade fuse / Cartridge fuse
Blade type fuse Blade type fuse
Cartridge type fuse Cartridge type fuse
1. Turn the vehicle off.
2. Turn all other switches off.
3. Remove the fuse panel cover by
pressing the tap and pulling up.
4. Check the removed fuse; replace it
if it is blown. To remove or insert the
fuse, use the fuse puller in the engine
compartment fuse panel.
5. Push in a new fuse of the same
rating, and make sure it fits tightly in
the clips. If it fits loosely, consult an
authorized HYUNDAI dealer.
NOTICE
After checking the fuse panel in the
engine compartment, securely install
the fuse panel cover. You may hear a
clicking sound if the cover is securely
latched. If it is not securely latched,
electrical failure may occur from water
contact.
Multi fuse
Multi type Multi type
ONX4OB091025 ONX4OB091025
If the multi fuse or midi fuse is blown,
consult an authorized HYUNDAI dealer.
ONX4OB091026 ONX4OB091026
09
ONX4OB091027 ONX4OB091027
9-51