A-1 Specifications - Omron NX Series Hardware User Manual

Appendices

A-1 Specifications

This section gives the general specifications that are common to NX-series NX502 CPU Unit and their
relevant products.
For the electrical and mechanical specifications, refer to the Models and Specifications section for
each product.
Enclosure
Grounding method
Operating
environment
Battery
Applicable standards
A-2
Item
Ambient operating tempera-
ture
Ambient operating humidity
Atmosphere
Ambient storage tempera-
ture
Altitude
Pollution degree
Noise immunity
Overvoltage category
EMC immunity level
Vibration resistance
Shock resistance
Life
Model
Specification
Mounted in a panel
Ground to less than 100 Ω.
0 to 55°C
10% to 95% (with no condensation)
Must be free from corrosive gases.
-25 to 70°C (excluding battery)
2,000 m max.
2 or less: Meets IEC 61010-2-201.
2 kV on power supply line (Conforms to IEC 61000-4-4.)
Category II: Meets IEC 61010-2-201.
Zone B
Conforms to IEC 60068-2-6.
5 to 8.4 Hz with 3.5-mm amplitude, 8.4 to 150 Hz, accelera-
2
tion of 9.8 m/s
100 min each in X, Y, and Z directions (10 sweeps of 10 min
each = 100 min total)
Gravity acceleration is assumed to be G=9.8 m/s
Conforms to IEC 60068-2-27.
2
147 m/s , 3 times in X, Y, and Z directions
Gravity acceleration is assumed to be G=9.8 m/s
5 years at 25°C (Power ON time rate 0% (power OFF))
CJ1W-BAT01 (sold separately)
Refer to the OMRON website (http://www.ia.omron.com/) or
consult your OMRON representative for the applicable stand-
ards.
NX-series NX502 CPU Unit Hardware User's Manual (W629)
2
.
2
.