Table of Contents
Advertisement
Hardware Reference Manual
GFK-3014F
Section 4:
This chapter describes the installation and initial startup operations.
Because the unit is available in several configurations, the description in
this chapter is related to the standard configuration.
WARNING
Before installing or removing any component, make sure that the system power and
external supplies have been turned off.
CAUTION
Static-sensitive Devices: Handle only at static-safe workstations.
CAUTION
Drain static electricity before you install or remove any parts. Installing or removing
modules without observing this precaution could result in damage to this and/or other
components in your system.
4.1
General Installation Guidelines
Adhere to the following guidelines during installation:
Observe all safety procedures to avoid damaging the system and
•
protect operators and users.
Before installing or removing any board, verify that the system power
•
and external supplies have been turned off.
Verify that the jumpers (if any) are correctly configured for your
•
application.
Make sure the RXi2-EP IPC is properly mounted.
•
Connect all I/O cables.
•
Do not restore power until all components are fitted correctly into the
•
system and all connections have been made properly.
Hardware Interface
Installation and Startup
Section 4
Feb 2023
15
Advertisement
Table of Contents
