Wall Mounting Through Wall; Figure 3-3 Flat Wall Mounting Through Wall - Emerson RXi2-EP Hardware Reference Manual

Hardware Reference Manual
GFK-3014F
3.2

Wall Mounting Through Wall

To mount the IPC with screws from the wall side, drill holes in the wall to
match the holes on the IPC. The holes should be 6.4-6.6 mm (0.25 in) for
snug to medium fit and 7.0 mm (0.28 in) for a loose fit. Refer to the
following figure for the positions for the holes. The thread in the
enclosure is a M6 with a usable thread length of 15 mm (0.60 in). Select a
screw length with a minimum of 10 mm (0.4 in) usable thread and torque
to 3.5 Nm (30.98 in lb).
Figure 3-3
Mounting
Flat Wall Mounting Through Wall
Section 3
Feb 2023
14