Table of Contents
Advertisement
RXi2-BP Hardware Reference Manual
GFK-3187B
Section 4:
This chapter describes the installation and initial startup operations.
WARNING
Before installing or removing any component, make sure that the system power and external
supplies have been turned off.
CAUTION
Static-sensitive Devices: Handle only at static-safe work stations.
CAUTION
Drain static electricity before you install or remove any parts. Installing or removing modules
without observing this precaution could result in damage to this and/or other components in your
system.
4.1
General Installation Guidelines
Adhere to the following guidelines during installation:
•
•
•
•
•
4.2
Required Materials
The following items are required to start the RXi2-BP IPC in a standard configuration:
•
•
•
Installation and Setup
Installation and Startup
Observe all safety procedures to avoid damaging the system, and to protect operators and
users.
Before installing or removing any board, verify that the system power and external
supplies have been turned off.
Make sure the RXi2-BP IPC is properly mounted.
Connect all I/O cables.
Do not restore power until all components are fitted correctly into the system and all
connections have been made properly.
Power supply
Keyboard and mouse
Video monitor
Section 4
November 2020
11
Advertisement
Table of Contents
