Available Options And Accessories; Esd And Emi; Table 2-2 Available Options; Table 2-3 Available Accessories - Emerson RXi2-EP Hardware Reference Manual

Hide thumbs Also See for RXi2-EP:
Table of Contents

Advertisement

Hardware Reference Manual
GFK-3014F
2.2

Available Options and Accessories

The following tables list the available options and accessories for the
RXi2-EP IPC.
Table 2-2
Item
R2E0N1A0A1T0A
R2E0N1C0A1T0A
R2E2N1A0A2T0A
R2E2N1C0A2T0A
Table 2-3
Item
Contact Emerson
R2X00ACCMP05
Contact Emerson
Note:
For the most current information on options and accessories, go to
https://www.emerson.com/en-us/where-to-buy?w=2&c=180&r=500&p=1&l=4&v=c
nearest Emerson sales or service office, or an authorized Emerson sales representative.
Options are subject to change without notice.
2.3

ESD and EMI

Electrostatic Discharge (ESD) is the discharge of static electricity.
Electromagnetic Interference (EMI) is a disturbance generated by an
external source that affects an electrical circuit by electromagnetic
induction, electrostatic coupling, or conduction. ESD and EMI issues may
show up in complete and operational systems. There are many ways to
avoid problems with these issues.
Any operational system with cables for I/O signals, connectivity, or
peripheral devices provides an entry point for ESD and EMI. If Emerson
does not manufacture the complete system, including enclosure and
cables, it is the responsibility of the system integrator and end user to
protect their system against potential problems. Filtering, optical
isolation, ESD gaskets, and other measures might be required at the
physical point of entry (enclosure wall of box or rack). For example, it is
state-of-the-art that protection cannot be done at the internal connector
of an RTM if a cable is attached and routed outside the enclosure. It has
to be done at the physical entry point as specified in this document.
Products manufactured by Emerson should normally be suitable for use
in properly designed and produced customer equipment (system boxes
or operational systems) without any major redesign. However, the
systems might be subject to problems and issues once assembled,
cabled, and used. The end user, system integrator or installer must test
Mounting
Available Options
Available Accessories
Description
0–slot, Quad Core 2.7 GHz, 128 GB, RJ–45
0–slot, Dual Core 2.2 GHz, 128 GB, RJ–45
2–slot, Quad Core 2.7 GHz, 128 GB, RJ–45
2–slot, Dual Core 2.2 GHz, 128 GB, RJ–45
Description
10 pcs Flat mounting kit
1 pc Flat mounting kit
1 pc Slim mounting kit
Section 2
Feb 2023
to find the
8

Advertisement

Table of Contents
loading

Table of Contents