Security Menu - Panasonic Toughbook CF-H1ADBAZCM Reference Manual

Setup Utility
NOTE
To boot from the following devices, make the settings as below.
To boot from
• USB connected device

Security Menu

Boot Prompt Configuration
Setup Utility Prompt
• When [Setup Utility Prompt] is set to [Disabled], the message "Press F2 for Setup"
played on [Panasonic] boot screen. However F2, F12
is not displayed.
Password on Boot
Set Supervisor Password
Hard Disk Lock
• Can be changed only when [Set Supervisor Password] is set.
User Password Protection
Set User Password
• Can be changed only when [Set Supervisor Password] is set.
Embedded Security (TPM)
Fingerprint Security
*5
Only when connected to CF-VEBH11AU : "Press F2 for Setup / F12 for LAN"
*6
Only when connected to CF-VEBH11AU
*7
You need to set the computer to the Cradle and connect an external keyboard to the Cradle, when the computer starts.
You need to set
: [Legacy USB Support] to [Enabled] (
*6
page 86)
and Del will work even if the message
88
Underlined items are the factory presets.
Disabled
Enabled
*5
is not dis-
Disabled
*7
Enabled
Enter the sub-menu.
Disabled
Enabled
No Protection
Protected
Enter the sub-menu.
Enter the sub-menu.
Enter the sub-menu.