Connect The Ac Adaptor - Panasonic Toughbook CF-H1ADBAZCM Reference Manual

Hardware Diagnostics
Regarding the PC-Diagnostic Utility
NOTE
For the hard disk drive and memory only, you can select standard diagnostic check or extended diagnostic check.
When the PC-Diagnostic Utility starts up, it will run the standard diagnostic check.
You cannot operate the PC-Diagnostic Utility by touching the screen.
Operations
Select icon
Click the icon
Complete the PC-Diagnostics
Utility and then restart the com-
puter
Running the Diagnostic Check
Run this utility using the default settings in the Setup Utility.
If the Setup Utility or other settings will not allow hardware to be executed, the hardware icon will be displayed in gray.
1

Connect the AC adaptor.

During the diagnostic check, do not remove the AC adaptor, or attach any peripheral devices.
2
Turn on or restart the computer, and press
played.
The Setup Utility starts up.
If the password is requested, enter the Supervisor Password.
If you are using the computer after changing the settings from the status at the time of purchase, we recommend
that you make a note of the settings that are changed.
3
Press .
F9
At the confirmation message, select [Yes] and press
External mouse operations
Place the cursor above the icon
Click (right click cannot be used)
Click (close)
Keyboard operations
Press Space and then press
((
Press Space above the icon
Press Ctrl + Alt + Del.
or while [Panasonic] boot screen is dis-
F2 Del
(Enter).
91
close) cannot be selected)