Security Menu - Panasonic Toughbook CF-28 Series Reference Manual

Setup Utility
Advanced Menu
Parallel Port
1
Mode*
2
I/O IRQ*
CardBus Controller A
Modem

Security Menu

Password on boot:
Set Supervisor Password:
Display Boot Menu:
Hard Disk Lock:
User Password Protection:
Set User Password:
Floppy Operation:
Parameters
Password on boot
Set Supervisor Password
Display Boot Menu
Hard Disk Lock*
User Password Protection
Set User Password*
Floppy Operation
Disable
Enable
Auto
Uni-directional
Bi-directional
EPP
ECP
378/IRQ7
278/IRQ5
Disable
Enable
Disable
Enable
NOTE
When the Setup Utility is started up with the User Password:
The User Password can be changed only when [User Password Protection] has been
set to [No Protection]. The User Password cannot be deleted.
( : Default)
Disable
Enable
To the sub-menu
Disable
Enable
Disable
Enable
No Protection
Protected
To the sub-menu
Disable
Enable
1
* This item is displayed only when [Parallel Port]
is set to [Enable] or [Auto].
2
*
This item is displayed only when the setting of
each port is [Enable].
In addition, an asterisk (*) displayed in front
denotes competing resources. Change the I/O
IRQ setting.
[Enable]
[Enter]
[Enable]
[Disable]
[No Protection]
[Enter]
[Enable]
* Setting impossible when the Supervisor Pass-
word is not set.
56