Panasonic Toughbook CF-H1ADBAZCM Reference Manual page 87

Setup Utility
*2
The sub-menu that appears when [Serial Port Configuration] is selected:
GPS
• Only for model with GPS
Barcode Reader
Trigger Mode
• Only when [Barcode Reader] is set to [Enabled].
Boot Menu
Boot Option Priorities
Boot Option # 1
Boot Option # 2
Boot Option # 3
Boot Option # 4
Boot Option # 5
To change the boot order
The default order is [USB Floppy Disk
Press (Enter) on the boot device you want to change and select the boot device from the following menu.
• When a selected boot device in the following menu already exists in either of the [Boot Option (#1 to #4)], the boot
device appears at the newly selected position by switching the positions with the original boot device that existed before
at the position.
• When you select [Disabled] in the following menu, the disabled [Boot Option] is ignored and the boot device in the next
[Boot Option] operates.
[USB Floppy Disk]
[Hard Disk]
*4
[LAN]
[USB Hard Disk]
[USB CD/DVD Drive]
Disabled
*3
It is recommended to use the Panasonic USB floppy disk drive (optional: CF-VFDU03U)
*4
Only when connected to CF-VEBH11AU
*3
] - [Hard Disk] - [USB CD/DVD Drive] - [LAN] - [USB Hard Disk].
*3
Disabled
Enabled
Disabled
Enabled
Software
Hardware
Underlined items are the factory preset
87
*3
USB Floppy Disk
Hard Disk
USB CD/DVD Drive
*4
LAN
USB Hard Disk