Useful Information - Panasonic Toughbook CF-H1ADBAZCM Reference Manual

Fingerprint Reader
• You cannot use Shift and Ctrl to input a password.
Enter your password again in [Confirm New Password], and press
F
2
Set the High Security Level.
Select [Fingerprint Security], and press
A
Select [Security mode], and select [High].
B
• Default setting: Simple
Press Esc to close the sub-menu.
C
Press F10, select [Yes], and press
D
NOTE
In the [High] security mode, you have to enter the Supervisor or User Password even after fingerprint authentication.
In the [Simple] security mode, you do not have to enter the Supervisor or User password after fingerprint authentica-
tion.

Useful Information

Backup
The file described below is necessary for recovering the Fingerprint authentication data. Back up this file periodically in a safe
location such as removable disk to avoid data loss resulting from some accidents. We recommend you to store the file in a
removable disk or network drive because the benefit of Fingerprint authentication security can be reduced if you keep the file
in the internal hard disk drive.
The backup password described below is necessary for bypassing the Fingerprint authentication. We recommend you to set
the backup password using the [User Enrollment] wizard. If you do not define the backup password, you may lose your data
in case of authentication hardware failure.
File used by each user
• Backup user passport data
(Default name: <UserAccount>.vtp)
You need this file when you replace the embedded fingerprint chip, or the hard disk drive, or when reinstalling Windows.
This file contains the fingerprints, encryption keys, and logon authentication data.
(Enter).
(Enter) to exit the Setup Utility.
64
(Enter).