Disabling/Enabling Wireless Communication
NOTE
To use wireless communication, set the wireless devices ([Wireless LAN] / [Bluetooth] / [Wireless WAN]) to [Enabled]
(default) in the [Advanced] - [Wireless Configuration] menu of the Setup Utility (
If the IEEE802.11a setting is changed in [Device Manager] (
You can check the wireless LAN communication status in Intel
cedure.
• Click
(Start) - [All Programs] - [Intel PROSet Wireless] - [Advanced Statistics].
Wireless Connection Disable Utility
You can automatically disable the wireless LAN/wireless WAN connection when a LAN cable is connected to the Cradle and
your computer is set to the Cradle. You need to install the Wireless Connection Disable Utility to use this function.
Installing the utility
1
Log on to Windows as an administrator.
2
Click
(Start) and input [c:\util\wdisable\setup.exe] in [Search programs and files], and
press
(Enter).
Follow the on-screen instructions.
3
Follow the on-screen instructions to install the Wireless Connection Disable Utility.
Checking the status of the wireless connection
NOTE
The Wireless Switch Utility should also be installed so that the Wireless Connection Disable Utility works. The Wire-
less Switch Utility has already been installed at the factory.
The utility does not automatically disable the Bluetooth connection.
page
page
79), the display will be changed accordingly.
®
PROSet/Wireless Software. Perform the following pro-
75
86).