Cleaning The Reading Window - Panasonic Toughbook CF-H1ADBAZCM Reference Manual

Barcode Reader
NOTE
If you click [No] in step
reader might not work correctly. Please confirm the setup utility setting.] appears, and the computer restarts.
Start up the Setup Utility (
page 56, To switch the modes
If the computer fails to change the setting, [Barcode setting failed. Please end the barcode-related application and
then retry.] appears.
Exit the running barcode-related application program, and click [Retry].
If the problem still persists, restart the computer.
If [Initialization failed.] appears, restart the computer.

Cleaning the Reading Window

If the reading window is dirty, gently wipe the reading window with a cloth or a cotton swab moistened with water.
Do not allow materials that can easily scratch the reading window to touch the window, such as sandpaper or metal object.
For parts other than the reading window, please read "Handling and Maintenance" in the OPERATING INSTRUCTIONS.
1
, [The barcode reader setting and the setup utility setting are inconsistent. The barcode
page 83), and set the computer to the desired mode.
57