Panasonic Toughbook CF-H1ADBAZCM Reference Manual page 25

Sleep and Hibernation Functions
25
To resume from sleep or hibernation
1
Press the power switch (A).
In the default setting, the Windows password will be requested to resume.
A
CAUTION
Do not perform the following operations until resuming is complete. After the display is resumed, wait approximately
15 seconds (normally) or 60 seconds (when the computer is on a network).
• Touch the screen, hardware buttons or power switch.
• Use an external mouse or other peripheral devices.
• Connect or disconnect the AC adaptor.
• Shut down or restart Windows.
• Enter sleep or hibernation (Wait approximately 1 minute).
• Set to or remove from the Cradle.
If the computer enters sleep while a USB keyboard or mouse is connected via Cradle, touching the USB keyboard
keys or mouse will resume the computer.
NOTE
After resuming from sleep or hibernation, the message "TosBtMng has stopped working" may appear.
Click [Close program].
If Bluetooth connections are cut off, click (Start) - [All Programs] - [Bluetooth] - [Bluetooth Settings], and connect to
the Bluetooth devices again.