Table of Contents
Advertisement
13.6
Mounting the passenger seat
13.7
Removing the front rider's seat
13.8
Mounting the front rider's seat
–
Hook holding lugs of the passenger seat into the bushings on
the subframe, lower the front, and simultaneously push back-
ward.
–
Insert locking pin
front of the passenger seat until the locking pin engages with
an audible click.
Warning
Danger of accidents The seat can come loose from the
401680-10
anchoring if it is not mounted correctly.
–
After assembly, check whether the seat is correctly
locked and cannot be pulled up.
–
Finally, check that the passenger seat is correctly mounted.
Preparatory work
–
Remove the passenger seat. (
Main work
–
Lift the rider's seat back and unhook in the
M00856-10
Main work
–
Attach the recesses on the front rider's seat to the fuel tank at
the desired seat position
seat forward while lowering it at the rear.
–
Finally, check that the front rider's seat is correctly mounted.
401704-10
Finishing work
–
Mount the passenger seat. (
SERVICE WORK ON THE CHASSIS 13
1
into the lock housing and push down the
p. 88)
A
B
or
, and push the front rider's
p. 89)
A
area.
89
Advertisement
Table of Contents
