Selecting The Line Mode - Panasonic KX-TC1851CB Operating Instructions Manual

" Settings

Selecting the Line Mode

If the line is connected to a low voltage system such as a PBX, set to "B".
Otherwise the unit may not ring and the Visual Call Waiting (Call Waiting
ID) Service may not be accessible (p. 43). Your phone comes from the
factory set to "A".
Make sure the handset is in the standby mode.
(FUNCTION/EXIT/CH)
1 Press
(›) (‹)
2
Press or
points to "Program".
FWD/EDIT (fl)
3 Press
(›) (‹)
4 Press or
points to "Set line mode".
FWD/EDIT (fl)
5 Press
(›) (‹)
6
Press or
FWD/EDIT (fl)
Press
≥A beep sounds.
≥To return to the standby mode, press
(FUNCTION/EXIT/CH).
≥You can exit the programming mode any time by pressing (FUNCTION/EXIT/CH).
16
.
repeatedly until the arrow
(Yes key).
repeatedly until the arrow
(Yes key).
to select "B" or "A".
(Save key).
1Save directory
Voicemail dial
1=Yes
4 3
Ringer volume
1Program
1=Yes
4 3
1Change language
Set flash time
1=Yes
4 3
1Set line mode
Set dial mode
1=Yes
4 3
Line mode
:A
1=Save
4 3
Line mode
:B