6-9. How to use the F key
after registering the parameter you frequently use to it.
Use F key
The registered parameter can be selected only by pressing F key
(1) Method of register
A
❷
❸
3) Select parameter
Item B which can be registered to the key is displayed. Press ITEM SELECT key
item to be registered.
The items that can be registered are; direct-pattern item data and memory switch 1 item.
4) Start register.
When READY key
When RETURN key
registration.
(2) State of registration at the time of purchase
"[S006] Sewing speed" is registered to the F key at the time of purchase.
❾
❽
❻
❼
B
❹
❷ is pressed, registration starts, and the screen returns to the mode screen.
❾ is pressed, the screen returns to the previous screen without performing
under the input mode.
1) Set the mode to the input mode
Under the input mode where SET READY LED
goes out, parameter registration is enabled.
If the current mode is the sewing mode, press
READY key
mode to the input mode.
2) Calling the F key setting screen
When you keep F key
F key setting screen A is displayed.
-
-
44
❷ to change over the
held pressed, the
❻ to select the