Key Customization; Assignable Data - JUKI LZ-2290C-F Instruction Manual

8-11. Key customization

It is possible to register a desired function to a key to customize the peel key arrays. Functions that can be
assigned to panel keys are as described below.
The key to which no function is assigned is displayed in blank.

8-11-1. Assignable data

<Sewing screen (Operator mode)>
<Sewing screen (Cycle mode)>
Operator mode
Counter
❶
❷
Sewing speed
❸
Needle thread tension
❹
Zigzag width
Stitch baseline position
❺
(other than the straight
stitch)
❻
Second sewing screen
❼
❽
❷ ❶ ❸
❹
❺ ❻
❷ ❶ ❸
❹ ❻ ❺
Initial value
Maintenance personnel
mode
Counter
Sewing speed
Needle thread tension
Zigzag width
Stitch baseline position
(other than the straight
stitch)
Stitch length
Sewing data list
Second sewing screen
<Sewing screen (Maintenance personnel mode)>
Cycle mode
Counter
Sewing speed
Needle thread tension
Zigzag width
Stitch baseline position
(other than the straight
stitch)
Second sewing screen
– 176 –
❹ ❷ ❶ ❸
❻ ❼ ❽ ❺
Assignable data
Pattern data
Pattern number
Cycle pattern number
Memory switch
One-touch changeover
One-touch type changeover
(multi-layered portion)
Bobbin winding mode
Counter
Second sewing screen
Function is not provided
Pattern data
Pattern number
Cycle pattern number
Memory switch
One-touch changeover
One-touch type changeover
(multi-layered portion)
Bobbin winding mode
Second sewing screen
Function is not provided