Table of Contents
Advertisement
❸
After the completion of input of a comment, the screen is returned to the previous screen by pressing RE-
❾ .
TURN key
As many as 14 characters can be entered for the comment. However, only eight characters are
displayed under the input mode.
(5) Completing the setting
❷
* When READY key
* When READY key
changed.
* Check the pattern number before use. If you press READY key
played, error display E010 will be shown on the screen. At this time, re-set the pattern number.
In the case the power to the sewing machine is turned OFF without pressing READY key
the pattern number and the set values for the X/Y scale rate and maximum sewing speed will not
be saved.
❻
❼
❾
On the comment input screen, as many as 14 char-
acters can be input. The characters that can be input
are alphabets, numbers and symbols.
Press ITEM SELECT key
input position. Press DATA CHANGE key
to select the characters to be entered.
When you press RESET key
ter at the current input position is erased. When you
keep RESET key
ters which have been input are erased.
Press READY key
The work clamp moves. Then, SET READY LED
lights up after the work clamp has gone up to enable
sewing.
❷ is pressed, the set values of pattern No., X/Y scale, etc. are memorized.
❷ is pressed, SET READY LED goes out. Setting of each item can be
－
20
When the presser is raised, be careful that
fingers are not caught in the presser since
the presser moves after having lowered.
❷ with pattern number 0 dis-
－
❻ to specify the
❸ , the charac-
❸ held pressed, all charac-
❷ .
❼
❷ ,
Advertisement
Table of Contents
