JUKI LK-1900S-SS Instruction Manual page 41

6) Erasing the pattern
In the case of erasing the pattern, select ITEM SELECT key
to delete. Press DATA CHANGE key
The delete confirmation screen is displayed. The pattern is deleted by pressing RESET key
screen.
* The standard pattern cannot be deleted.
* In the case of copying the direct pattern, select "06 Direct pattern copy" on the mode screen. In the case
of copying the cycle pattern, select "07 Cycle pattern copy" on the mode screen. Both the direct pattern
and the cycle pattern can be copied in the similar procedure.
❷ ❸
❼ to select Trash
❻
❼
* The pattern key and the cycle pattern can be
❻ ❼
* To select a copied user pattern, press ITEM
－ －
39
❻ to select the pattern number you want
. Then, press READY key
copied in the similar procedure. To create a new
cycle pattern, press ITEM SELECT key
to select new creation
❻ to display
SELECT key
pattern number is displayed on the upper left sec-
tion of the screen. Then, press DATA CHANGE
❼ to select a pattern number.
key
❷ .
❸ on this
❻
.
when the