Thermistor Fan - Asko TLS752 Manual

Table of Contents

1. Function

• The fan senses the temperature of exhaust air.

• The higher the temperature is, the smaller the resistance is.

2. Specification

• Thermistor with following temperature-resistance characteristic.

at 90°C : R = 4.43 kΩ

at 40°C : R = 26.07 kΩ

• Type name : CWT-DWE-1C18-A

3. Checking method of mal-function

• If the resistance between terminals is within the adequate range, the fan is in

normal operation.

• You can test the resistance of the thermistor as follows.

- Put the metal rod into cold water (10~20°C): 40 within 30 seconds

- Put the metal rod into boiling water (95~100°C): 4 within 30 seconds

• If 'H2' error is displayed when you press the power and start button, the thermistor is not connected so

replace it.

4. Procedure of replacement

① Plate Top remove

② Panel F Ass'y remove

③ Cabinet Front Ass'y remove

④ Frame Upper remove

⑤ Drum Ass'y remove

⑥ Check the position of the part.

⑦ Remove wires and 1 screw to detach the part.

⑧ Assemble the parts in reverse order.

Thermistor Fan

Part Code : 361AAAAC20

Table of Contents