Thermostat Fan - Asko TLS752 Manual

Table of Contents

1. Function

• This is a bimetal-type switch which protects the clothes from damage by

overheating.

• If the exaust air is too hot, this thermostat stops the motor and after the air is

cooled down, it restarts the motor.

2. Specification

• A bimetal thermostat with the terminals normally connected

• Electric rating : 15A at 125V

• Opening temperature : 85±5°C, Closing temperature : 70±5°C

• Type name : PW-3N

3. Checking method of mal-function

• If temperatures are normal, the terminals of this part are connected to each

other.

• Put the round metal part into boiling water and check if the resistance

between the terminals drops to 0.3 or below.

• Put the same part into cold water and check if the terminals are opened.

• If the terminals do not react as mentioned above, replace them.

4. Procedure of replacement

① Plate Top remove

② Panel F Ass'y remove

③ Cabinet Front Ass'y remove

④ Frame Upper remove

⑤ Drum Ass'y remove

⑥ check the position of the part

⑦ Remove the wires and screws to disassemble the part.

⑧ Assemble the parts in reverse order.

Thermostat Fan

Part Code : 3619047900

Table of Contents