Asko TLS752 Manual page 46

Option 2: 3-Wire connection with a power supply cord.
lf your local codes or ordinances permit the connection of a frame-grounding conductor to the neutral
wire, use these instructions.
If your local codes or ordinances do not allow the connection of a frame-grounding conductor to the
neutral wire, use the instructions under Section 1: Optional 3- wire connection.
Section 1
Option 3: Optional 3-wire connection.
• If your local codes or ordinances do not allow the connection of a frame-
grounding conductor to the neutral wire, use the instructions under this
section.
1. Connect neutral wire (white) of power cord
to center terminal block screw.
2. Connect ground wire of appliance and
neutral wire of power cord to center terminal
block screw.
3. Connect red and black wires to the left and
right terminal block screws.
4. Make sure the strain relief screw is
tightened. Be sure that all terminal block
nuts are on tight and power cord is in right
position.
5. Connect independent ground wire from
external ground connector to proper ground.
46