Simatic Micro Memory Card - Siemens SIMATIC ET 200S M151-3 PN Manual

1.3

SIMATIC Micro Memory Card

Insertion of the SIMATIC Micro Memory Card
A SIMATIC Micro Memory Card is used as a memory medium for the IM 151-3 PN HIGH
FEATURE.
A SIMATIC Micro Memory Card with 64 KB is sufficient for storing the name of the device.
An MMC of 4 MB or higher is required for a firmware update.
Position of the module slot for the SIMATIC Micro Memory Card
①
②
③
④
⑤
⑥
⑦
⑧
Insertion of the SIMATIC Micro Memory Card
Note
You can save either process-related data (device names) or firmware update data on one
MMC.
Interface module IM151-3 PN HIGH FEATURE (6ES7151-3BA23-0AB0)
Manual, 08/2010, A5E01584258-04
7
6
Group error (red)
Bus fault (red)
Maintenance display (yellow)
Supply voltage (green)
Connection to a switch or IO controller (green)
SIMATIC Micro Memory Card
Cable connection
Locking / unlocking (ejector) of the Micro Memory Card
1.3 SIMATIC Micro Memory Card
1
2
3
4
5
8
Properties
15