Snmp - Siemens SIMATIC ET 200S M151-3 PN Manual

Properties

1.2 SNMP

Rated supply voltage of the electronic
components (1L+)


Galvanic isolation



Permitted potential difference (to the rail)
Insulation test voltage
Current consumption from rated supply voltage
(1L+)
Power loss of the module
Interrupts
Diagnostic function





1.2 SNMP
SNMP
The interface module supports the Ethernet service SNMP. MIB-2 (RFC1213) is supported.
R/W objects can be changed using SNMP tools and are stored in the module.
Following replacement with a brand new module, the R/W objects of the interface module
are set to the factory settings.
14
Reverse-polarity protection
Voltage failure bypass
Between the rear panel bus and electronic
components
Between Ethernet and electronic components
Between the supply voltage and electronic
components
Group error
Bus monitoring PROFINET IO
Monitoring of the supply voltage of the
electronics
Maintenance requirements (maintenance)
Existing connection to network
Voltages, currents, potentials
24 VDC
Yes
Min. 20 ms
No
Yes
No
75 VDC, 60 VAC
500 VDC
Approx. 200 mA
Approx. 3.3 W
Status, Interrupts, Diagnostics
Yes
Yes
Red "SF" LED
Red "BF" LED
Green "ON" LED
Yellow "maint" LED
One green LED "LINK" per interface
Interface module IM151-3 PN HIGH FEATURE (6ES7151-3BA23-0AB0)
Manual, 08/2010, A5E01584258-04