System Setup
A
S
LARM
ETTINGS
(C
I/O A
LARM
(Supported NVR models only)
For models that support an alarm input, click the I/O tab in the sidebar to configure.
•
Alarm In:
Click to choose the alarm input channel.
Local->x:
For external alarm input devices connected to the NVR.
o
CHx->1:
For external alarm input devices connected to IP cameras.
o
•
Alarm Type:
Click to choose the alarm input type, Normally Open (N.O.) or Normally Closed
(N.C.) or choose OFF to disable this sensor trigger function.
•
Buzzer:
Click to enable the NVR's buzzer and select a duration to alert you when motion is
detected.
SECO-LARM U.S.A., Inc.
)
ONTINUED
ENFORCER 4K Network Video Recorder
89