Table of Contents
Advertisement
ENFORCER 4K Network Video Recorder
AI –
AI A
S
LARM
ETTINGS
•
Latch Time:
Click to configure the external alarm duration when triggered.
•
Record:
Click to enable the NVR to trigger additional cameras to start recording when motion is
detected. Click the drop-down arrow
channels.
o Click the
icon to open the popup shown below and click the Record Channel checkbox in
the upper left corner to enable recording.
o Click the checkbox beside the rows of channel numbers to select all channels.
o OR click on the individual camera number that you want to trigger for recording.
•
Post Recording:
event has occurred.
•
Show Message:
•
Send Email:
Click to enable/disable sending an email alert when an alarm event is detected.
•
Full Screen:
Click to enable/disable full-screen view in Live View mode when triggered.
•
Voice Prompts:
is connected to a speaker. For details on adding a customized voice alert, see Voice Prompts
on pg. 98.
•
Default:
Click Default to revert to default settings.
•
Copy:
Click the Copy button at the bottom of the screen to apply all settings to other connected
cameras.
•
Apply:
Click Apply to save settings.
182
, AD (A
TTRIBUTION
Click to change the duration for your NVR to continue recording after an
Click to enable/disable the onscreen alarm icon
Click to select a customized voice alert when an alarm is triggered if your NVR
D
) A
ETECTION
at the top of the column to select or deselect all
System Setup
S
(C
LARM
ETTINGS
when triggered.
SECO-LARM U.S.A., Inc.
)
ONTINUED
Advertisement
Table of Contents
