Table of Contents
Advertisement
ENFORCER 4K Network Video Recorder
–
C
C
HANNEL
HANNEL
C
P
& P
ONNECTING
LUG
To connect a Plug & Play PoE Camera, proceed as follows.
1. Keep the default settings.
2. Change the default username and password to be same as those of the camera.
3. Make sure your IP camera is already set to DHCP IP address. If your camera is set to a static
IP address which is different from the IP address segment in the PoE router, your IP camera
will be unable to get online (See General Settings beginning on pg. 197).
4. Connect the IP camera to a PoE port on the NVR's rear panel.
5. After starting the camera, it will be online and displayed in the camera list.
50
, IP C
,
P
HANNELS
P
E C
LAY
O
AMERAS
E NVR C
O
ONNECTION
System Setup
(C
)
ONTINUED
SECO-LARM U.S.A., Inc.
Advertisement
Table of Contents
