Table of Contents
Advertisement
ENFORCER 4K Network Video Recorder
AI –
AI S
, S
ETUP
CHEDULE
4. The set schedule is valid only for the selected mode and channel. If you want to use the same
schedule for other channels, click Copy.
5. Click Save to save changes made.
6. Repeat the process to schedule other detection modes on the same channel or set up other
channels.
7. Right-click to exit.
1. Choose the Channel you want to set.
2. Check the Enable button to activate the AI Recording Schedule.
3. Click a radio button to choose a detection mode. Note that while each channel may use multiple
detection modes, you must schedule each separately. However, the modes with red radio
buttons are mutually exclusive such that only one of them can be activated at the same time.
4. If desired, set a time schedule (default, active 24 hours/day, 7 days/week) for the selected
detection mode on this channel. Green squares represent times when deterrence is active.
Gray blocks represent times that are occupied and unable to be selected. Black blocks are
available for selection.
a. Click on an individual square to change (each square represents 30 minutes).
b. OR click and drag to select a group of squares corresponding to a period of time.
5. The set schedule is valid only for the selected detection mode and channel. If you want to use
the same schedule for other channels, click Copy.
6. Click Apply to save.
7. Repeat to set a schedule for other detection modes on the same channel or other channels
(Note that no two red modes may be scheduled at the same time on the same channel).
8. Right-click to exit.
138
(C
)
ONTINUED
Interface B
System Setup
SECO-LARM U.S.A., Inc.
Advertisement
Table of Contents
