System Setup
–
A
S
LARM
ETTINGS
•
Latch Time:
Click to configure the external alarm duration when triggered.
•
Record:
Click to instruct your NVR to trigger additional cameras to start recording when motion
is detected. Click the dropdown arrow
o Click the
icon to open the popup shown below and click the Record Channel checkbox in
the upper left corner to enable recording.
o Click the checkbox beside the rows of channel numbers to select all channels.
o OR click on the individual camera number that you want to trigger for recording.
•
Post Recording:
event has occurred.
•
Show Message:
triggered.
•
Send Email:
Click enable/disable sending an email alert when an alarm event is detected.
SECO-LARM U.S.A., Inc.
M
A
(C
OTION
LARM
Scroll right for more columns
Click to change the duration for your NVR to continue recording after an
Click to enable/disable the onscreen alarm icon
ENFORCER 4K Network Video Recorder
)
ONTINUED
to select or deselect all channels.
when motion detection is
87