Table of Contents
Advertisement
ENFORCER 4K Network Video Recorder
–
S
D
TORAGE
(C
ISK
If your NVR supports multiple hard drives and more than 1 hard drive is installed in your NVR, the
edit icon
will also appear onscreen. Click this icon to edit the drive as shown below right.
•
Disk Type:
Click to set how the disk
should be used.
Read Write:
Choose Allow List from the
o
dropdown.
Read Only:
Click to enter a single IP
o
address.
Redundant:
Click to add a block of IP
o
addresses by entering the starting and ending addresses in the range.
NOTES:
• Redundant disks can only support the saving of Mainstream recordings.
• If the Disk Type is changed, the hard drives may temporarily be unmounted and offline.
Please wait until the drives can be remounted.
•
Disk Group:
Click to assign the drives into different groups for recording (see Disk Group
beginning on pg. 215 for more information).
214
)
ONTINUED
System Setup
SECO-LARM U.S.A., Inc.
Advertisement
Table of Contents
