Table of Contents
Advertisement
ENFORCER 4K Network Video Recorder
System Setup
–
A
S
W
U
IP C
D
LARM
ETTINGS
(C
)
HEN
SING
AMERAS WITH
ETERRENCE
ONTINUED
When the camera is connected to the NVR through the client port, you should see a schedule
interface similar to the following.
In the default setting, the LEDs will not trigger between 4:30 p.m. and 6:30 a.m. Adjust as desired.
Each square represents 30 minutes, and a blue square represents when the white LEDs should be
active for deterrence while a black square represents when deterrence should be inactive. Click on
a particular square to change its color or click and drag the mouse over a range to change a period
of time.
Click Save to save any changes. Right-click to exit.
104
SECO-LARM U.S.A., Inc.
Advertisement
Table of Contents
