Table of Contents
Advertisement
ENFORCER 4K Network Video Recorder
AI –
AI S
, PD & VD (P
ETUP
Realtime Mode:
o
camera to track and capture objects
entering and leaving the detection area
(setup instructions below). You'll receive
two notifications in the Alarm Notification
Panel – one when the object is first
detected and again as the object leaves the
detection area. This is useful if you want to
continuously monitor an object in an area
and get alerts in real time (recommended).
Interval Mode:
o
number of snapshots to take and the time
interval between snapshots.
▪
Snap Num:
▪
Snap Frequency:
•
Min Pixel:
Set the minimum object size (in pixels) that the camera will attempt to recognize.
The smaller the number of pixels, the more objects the camera will try to recognize and at a
farther distance. If you find that the camera is recognizing too many unwanted distant objects,
try increasing the minimum pixel value to train the camera to look for larger objects that are
typically at a closer distance.
•
Max Pixel:
The maximum object size (in pixels) that the camera will attempt to recognize. If you
want the camera to detect objects in closer proximity, try increasing the maximum pixel value,
otherwise leave the value at the default.
•
Sensitivity:
Click to adjust the sensitivity level of the detection area. The higher the number,
the more sensitive it will be when detecting objects.
•
Detection Type:
•
Detection Mode:
the camera's field of view, or Motion Mode, to analyze only moving objects.
•
Detection Range:
Full Screen:
Choose to make the entire screen the detection range.
o
Customize:
Choose to set a rectangular area of the screen as the detection range area.
o
Click inside the rectangle to drag to a new location. Click a corner and drag to resize.
•
Dynamic Marking:
detected object during Live View and playback.
116
EDESTRIAN AND
Select to instruct the
Select to specify the
Enter the number of snapshots to take.
Enter the time interval between snapshots.
Click to choose the type of objects to target for detection.
Click the dropdown to choose between Static Mode, to analyze all objects in
Click to choose between Full Screen or Customize detection range.
Click to disable or reenable the green tracking frame surrounding a
V
D
EHICLE
ETECTION
SECO-LARM U.S.A., Inc.
System Setup
)
(C
)
ONTINUED
Advertisement
Table of Contents
