System Setup
–
C
C
HANNEL
HANNEL
C
E
ONNECTING
XTERNAL
To connect an IP camera via a LAN or Internet, proceed as follows.
1. Ensure your NVR is properly connected to the LAN and or Internet.
2. Change the PoE Switch Mode to manual.
a. To change all channels to Manual, click the Switch Mode dropdown and select Manual.
b. To add an individual channel manually, click the edit icon
drop-down arrow next to Switch Mode to select Manual, and click OK to save.
3. To add an individual camera on a LAN
a. Change the PoE mode to Manual as described above.
b. Either click the Search button which will display all available cameras in the LAN.
SECO-LARM U.S.A., Inc.
, IP C
,
P
HANNELS
O
C
LAN/I
AMERAS VIA
ENFORCER 4K Network Video Recorder
E NVR C
ONNECTION
NTERNET
(C
)
ONTINUED
in the channel list, click the
51