Table of Contents
Advertisement
Startup
–
S
W
N
TART
IZARD
•
Http/Https/RTSP:
or to allow the NVR to stream in real time to another device (e.g., a streaming Media player.).
The ONVIF also uses this same port. If the default port (80) is already being used by another
application, change it here.
•
Client:
This port is used by the NVR to send information. If the default port (9000) is already
being used by another application, change it here.
•
Internal Port:
This port is usually used for a LAN connection.
•
External Port:
This port is usually used for a WAN connection.
•
UPNP:
This setting is related to whether you want to log in remotely to the NVR using the Web
Client via different router/LAN. If you do and if your router supports UPnP, check here to enable
this option and you will not need to manually configure port forwarding on your router.
Otherwise, if your router does not support UPnP, leave this unchecked and make sure to
manually configure port forwarding on your router.
•
Mapping Strategy:
Auto. If you want to select a particular port, choose Manual.
•
Enable PPPoE:
PPPoE is a
protocol that allows the NVR to
connect to the network directly via
a DSL modem. Check this box to
enable this and enter the User and
Password provided by your ISP.
SECO-LARM U.S.A., Inc.
C
ETWORK
ONFIGURATION
This port is used to log in remotely to the NVR (e.g., using the Web Client),
If you want the router UPnP server to randomly distribute the ports, choose
ENFORCER 4K Network Video Recorder
(C
)
ONTINUED
23
Advertisement
Table of Contents
