Hard Reset - SECO-LARM ENFORCER DRN-104-2TB Installation Manual

ENFORCER 4K Network Video Recorder
–
P
R
ASSWORD
ESETTING A
H R
ARD ESET
If you are unable to reset the password using any of the methods described above, you can reset
your NVR to factory default.
NOTE: Resetting your NVR will restore all settings to their factory
defaults resulting in the loss of all stored customizations, data,
and other settings and should be considered only as a last
resort.
1. To initiate a hard reset, find the reset button on the back just under
the USB port (see diagram, right).
2. Use a small pin or paper clip to press and hold the reset button for 10
seconds until you hear a beep.
20
P
(C
ASSWORD
ONTINUED
Installation and Connection
)
SECO-LARM U.S.A., Inc.
Reset button