Font Attributes - Printronix P5000 Series Setup Manual

Page Format
(from page 78)
Margins Perforation
Skip
Left Margin Disable*
0* columns
1/2 inch
(0-369) 2/3 inch
Right Margin 5/6 inch
0* columns 1 inch
(0-369)
Bottom Margin
0* lines
(0-451)
Printer Protocol
Select the LinePrinter+ protocol you wish to use. Refer to the LinePrinter Plus
Programmer's Reference Manual for more information.
Print Char Set
When this selection is displayed and the ENTER key is pressed, the current
character set is printed.
CPI/LPI Select
This parameter lets you specify the characters per inch (cpi) and lines per
inch (lpi) values.

Font Attributes

Typefaces
•
Data Processing. A general purpose font printing out at 120 dpi
horizontally and 72 dpi vertically. The width of the font will vary with each
cpi.
•
NLQ. A high quality font printing at 180 dpi horizontally and 96 dpi
vertically. This font has serifs and the width of the font varies with the cpi.
•
OCR-A / OCR-B. Optical character recognition fonts printing at 120 dpi
horizontally and 144 dpi vertically. Both fonts print only at 10 cpi.
Form Length Form Width
Abs. Length IN Abs. Width IN
11.0* inches 13.6* inches
(0.1-24) (0.1-13.6)
Abs. Length MM Abs. Width MM
279.4* millimeters 345.4* millimeters
(0.1-609.6) (0.1-345.4)
Funct. of Lines Funct. of CPI
66* lines 136* Characters
(1-192) (1-272)
Submenu
* = Factory Default
79