Printronix P5000 Series Setup Manual page 46

Chapter 2
Install Basic Components
3. Raise the forms thickness lever as far as it will go. This allows you to turn
the vertical position knob freely in order to align the top-of-form.
4. Locate the TOF indicator. It is the small tab located on the tractor doors.
5. Turn the vertical position knob to align the top of the first print line with the
TOF indicator.
46
Figure 38. Raising the Forms Thickness Lever
TOF Indicator
Figure 39. Aligning the Top-of-Form
Forms Thickness
Lever
Perforation
Vertical Position
Knob