Proprinter Xl Emulation - Printronix P5000 Series Setup Manual

Chapter 4
LinePrinter+

Proprinter XL Emulation

Printer
Protocol
(from page 78)
Proprinter XL
Define CR
Code
CR = CR*
CR = CR + LF
Define CR Code
This option controls the action of the printer when it receives a Carriage
Return code (hex 0D) from the host computer. If this feature is enabled, each
time the printer receives a Carriage Return, it inserts an additional Line Feed
code (hex 0A) into the data stream. Do not use this feature if the host
computer sends Line Feeds to the printer.
•
CR = CR. Does not insert an extra Line Feed after each Carriage Return.
•
CR = CR + LF. Inserts an extra Line Feed after each Carriage Return.
Auto LF
This option defines the printer actions when print data is received past the
forms width setting.
•
Enable. Performs an automatic carriage return and line feed when data is
received past the forms width.
•
Disable. Discards any data past the forms width.
82
Auto LF Define LF
Code
Enable* LF = LF*
Disable LF = CR + LF
* = Factory Default
FF Valid at
Character Set
TOF
Enable* Code Page 437*
Disable Code Page 850
OCR-A
OCR-B
Code Page 210
Code Page 220
Code Page 852
Code Page 855
Code Page 857
Code Page 862
Code Page 866
Lithuanian 1
Lithuanian 2
Hebrew New
Hebrew DEC
Hebrew Old
Latin 9 8859-15
Alt. Char Set 20 CPI
Condensed
Set 1* Enable*
Set 2 Disable