Attach The Control Panel Overlays; Remove The Shipping Restraints (Pedestal Model) - Printronix P5000 Series Setup Manual

Attach the Control Panel Overlays

Attach the Control Panel Overlays
Figure 13. Attaching Control Panel Overlay
1. Choose the overlay labels in the appropriate language.
2. Open the printer cover, peel off the back of the overlay and apply to the
control panel.

Remove the Shipping Restraints (Pedestal Model)

Protective films and foam blocks protect printer mechanisms from damage
during shipment. This section describes how to remove these shipping
restraints from the pedestal model before you operate the printer.
Save the foam blocks, since you may need to reinstall them.
If it is necessary to move the printer, reinstall the shipping restraints. Reverse
the steps in this section.
CAUTION
To avoid shipping damage, reinstall the shipping restraints whenever
you move or ship the printer.
27